View Request Cart


Files & Rasps	Burs & Hole Saws	Mounted Points	Fine Grinding & Polishing	Grinding & Cut-Off Wheels	Power & Maint. Brushes	Power Tools

Search Site

Files & Rasps

Burs & Hole Saws

Mounted Points

Coated & Non-Woven Abrasives

Grinding & Cut-Off Wheels

» POLIFAN® Flap Discs

» Depressed Center Grinding (Type 27)

» Depressed Center Cutting, Light Grinding (Type 27) PIPELINE

» Depressed Center Grinding (Type 27) NOTCHING

» Depressed Center Grinding (Type 28) SAUCER

» Flaring Cup Wheels (Type 11)

» Flat Grinding (Type 1)

» Cones and Plugs

» Floor and Hand Rubs

» Flexible Grinding Wheels

» DUODISC Combination Cutting & Grinding Discs

» Depressed Center Cut-Off Wheels

» Flat Cut-Off Wheels

» Diamond Cut-Off Wheels (Flat Type 1)

» Thin Cut-Offs for Angle Grinders

» Large Diameter / Stationary Cut-Off Wheels

» Kits & Accessories

» Non-Catalog Items

Power Brushes

Maintenance Brushes

Power Tools

Thin Cut-Offs for Angle Grinders - Thin Cut-Off Wheels Type 1 - Cut-Off Wheel Test Pak -Type 1

PFERD » Grinding & Cut-Off Wheels » Thin Cut-Offs for Angle Grinders » Thin Cut-Off Wheels Type 1 » Cut-Off Wheel Test Pak -Type 1

PFERD Grinding & Cut-off Wheels offer world-leading performance. For free-hand, portable, chop and stationary saws.

PFERD thin wheels cut faster than conventional wheels, leaving a cleaner cut, with minimal burr. Thin cut-off wheels are ideally suited for thin gauge sheet stock, thin walled tubing and small diameter cross sections. Material should always be cut at a right angle to the work piece. Larger work pieces require thicker PFERD cut-off wheels for improved lateral stability.

PFERD manufactures a wide selection of high performance flat (type 1) thin cut-off wheels to suit all needs from low purchase price to highest level of performance attainable.
Usage Tip:

.040 thickness recommended for sheet stock and tube19 gauge and higher
.045 thickness recommended for 14-18 gauge material
For larger cross sections, please use 3/32 and larger cut-off wheels for performance and safety.
Not sure which performance level is right for your application? Pick up a test pak and put them to the test on your grinder!

EDP	Diameter	Thickness (Inches)	Arbor Hole	Shape/Form	Grit	Max. RPM	Contents
69750	4-1/2	.040	7/8	Flat (Type 1)	60	13,300	69945, 69948, 69845
69751	5	.040	7/8	Flat (Type 1)	60	12,200	69950, 69953, 69855
69752	6	.040	7/8	Flat (Type 1)	60	10,200	69960, 69963, 69862
69755	4-1/2	.045	7/8	Flat (Type 1)	46	13,300	69949, 63607, 69846
69756	5	.045	7/8	Flat (Type 1)	46	12,200	69954, 63608, 69857
69757	6	.045	7/8	Flat (Type 1)	46	10,200	69964, 63614, 69865

sBrand="PFERD" Thin Cut-Offs for Angle Grinders - Thin Cut-Off Wheels Type 1 - Cut-Off Wheel Test Pak -Type 1

Thin Cut-Offs for Angle Grinders - Thin Cut-Off Wheels Type 1 - Cut-Off Wheel Test Pak -Type 1