 Flexible Shafts & Accessories
PFERD » Power Tools » Flexible Shafts & Accessories
PFERD Flexible Shafts are available in a variety of lengths and diameters to suit your needs. Whether you require a large diameter shaft to transfer high torque at low speed, or a highly flexible shaft to run at high speeds with small diameter tools, PFERD offers a wide selection of solutions to equip your flexible shaft machine.
 |
| G16 High Speed Flexible Shaft System |
G16 High Speed section includes shafts with a 4mm core diameter for high flexibility and high speed rating (24,000 - 40,000 RPM), and all corresponding handpieces that fit the shaft. Compatible with all PFERD flexible shaft machines available in the U.S. market. |
| |
• |
G16 High Speed Shaft, Core and Casing |
| |
• |
G16 High Speed Shaft Compatible Handpieces |
|
| |
|
| G16 Low Speed Flexible Shaft System |
G16 High Speed section includes shafts with a 6mm core diameter for good flexibility and higher torque at low to medium speeds (10,000 - 25,000 RPM), and all corresponding handpieces that fit the shaft. Compatible with all PFERD flexible shaft machines available in the U.S. market. |
| |
• |
G16 Low Speed Shaft, Core and Casing |
| |
• |
G16 Low Speed Shaft Compatible Handpieces |
|
| |
 |
| G22 Flexible Shaft System |
G22 system includes shafts with a 7mm core diameter for high torque at low to medium speeds (12,000 - 25,000 RPM), and all corresponding handpieces that fit the shaft. Compatible with all PFERD flexible shaft machines available in the U.S. market. |
| |
• |
G22 Shaft, Core and Casing |
| |
• |
G22 Shaft Compatible Handpieces |
|
| |
|
| G28 Flexible Shaft System |
G28 system includes shafts with a 10mm core diameter for highest torque at low to medium speeds (750 - 18,000 RPM), and all corresponding handpieces that fit the shaft. Compatible with RUER 10/250 SI and all variations of PFERD's Mammoth Machine. Collet range extends from 3/32" through 1/4" |
| |
• |
G28-10 Shaft, Core and Casing |
| |
• |
G28-10 Shaft Compatible Handpieces |
|
| |
|
| G28 Heavy Duty Flexible Shaft System |
G28 Heavy Duty system includes the same shafts as standard G28, but with handpieces designed to accommodate larger collets for large shaft sizes. Compatible all variations of PFERD's Mammoth Machine. Collet range extends from 1/4" through 1/2" |
| |
• |
G28-12 Shaft, Core and Casing |
| |
• |
G28-12 Shaft Compatible Handpieces |
|
| |
|
 |
|
| Hand Pieces for Flexible Shafts |
A wide variety of handpieces for flexible shafts are available. Each handpiece is designed to work with specific shafts and collets. |
| |
• |
Handpieces for Flexible Shaft System G16 - High Speed |
| |
• |
Handpieces for Flexible Shaft System G16 |
| |
• |
Handpieces for Flexible Shaft System G22 |
| |
• |
Handpieces for Flexible Shaft System G28-10 |
| |
• |
Handpieces for Flexible Shaft System G28-12 |
|
| |
 |
| Angle Drive |
This handpiece allows the use of G22-equipped flexible shaft machines as an angle grinder. Additional accessories convert the angle drive to a belt sander to maximize the versatility of your PFERD flexible shaft machine. |
| |
• |
Right Angle Hand Piece WT 7 E M14 |
| |
• |
Keys for Right Angle Hand Piece WT 7 E M14 |
| |
• |
Belt Conversion Kit for Right Angle Hand Piece WT 7 E M14 |
|
| |
 |
| Keys |
Included in this section are replacement keys available for all tools and handpieces. |
| |
• |
All Keys and Wrenches |
| |
• |
Keys for UGER 5/250 SI |
| |
• |
Keys for UGER 5/90 SI |
| |
• |
Keys for UGER 10/60 SI |
| |
• |
Keys for UGER 10/20 SI |
| |
• |
Keys for UWER 5/200 SI |
| |
• |
Keys for UBS 5/100 SI |
| |
• |
Keys for Mammoth Machines |
| |
• |
Keys for RUER 5/250 SI |
| |
• |
Keys for RUER 10/250 SI |
| |
• |
Keys for Overdrive Unit ST 103 |
| |
• |
Keys for Hand Piece 4 ZBG (G16) |
| |
• |
Keys for Hand Piece 7 ZBA (G22) |
| |
• |
Keys for Hand Piece 10 ZGE (G28) |
| |
• |
Keys for Hand Piece 12 ZGE (G28) |
| |
• |
Keys for Hand Piece WZ 4 A (G16) |
| |
• |
Keys for Hand Piece WZ 7 B (G22) |
| |
• |
Keys for Hand Piece WZ 10 B (G28) |
| |
• |
Keys for Hand Piece WZ 7 45 (G22) |
| |
• |
Keys for Hand Piece WZ 10 45 (G28) |
| |
• |
Keys for Angle Drive WT 7 E M14 |
| |
• |
Keys for Belt Grinder Attachment Holder BSVH 41 |
|
| |
 |
| Collets for Power Tools |
PFERD offers a wide selection of imperial and metric collet diameters for all power tools offered. Collets are organized by "Group Number". To locate the appropriate collet for your PFERD tool or handpiece, please notate the group number required and choose it from this listing. Or, locate your tool/handpiece on this website, and choose "Show Collets" to easily locate the right collet for your tool. |
| |
• |
Collets - Group 1 |
| |
• |
Collets - Group 4 |
| |
• |
Collets - Group 6 |
| |
• |
Collets - Group 9 |
| |
• |
Collets - Group 10 |
| |
• |
Collets - Group 11 |
| |
• |
Collets - Group 12 |
|
| |
|
 |
|
| Overdrive Unit for Mammoth Flexible Shaft Machines |
This overdrive unit has a 1:3 transmission ratio. When attached to your Mammoth machine, the overdrive allows milling and grinding work to be conducted in the 15,000 to 36,000 RPM range. |
| |
• |
Overdrive Unit ST 103 for Flexible Shaft Drives |
| |
• |
Overdrive Unit ST 103 Accessories |
|
| |
 |
| Microfilter |
This in-line filter inserts into air hose supply lines to remove any particles from the air in high dust / dirt areas. |
|
| |
|
