Power Tool Kits

Grinding set PBS 3/200 DH: Angled belt air grinder with 4 additional attachment arms and matching tools. This set covers a wide variety of grinding applications for smaller surfaces. The grinder's slim head design and compact casing allows work in confined spaces. Surface conditioning on convex, concave or straight smaller work pieces can be easily achieved using the included COMBIDISC^® abrasives grain range. The belt attachment and various belts cover the other side of surface processing, allowing conditioning of rounded surfaces and difficult to reach corners. An ideal kit for finer jobs and an addition to any workshop.

• Contents:
  • 1 angled air grinder PBS 3/200 DH 99 (20,000 RPM, 0.3 HP) mounted with belt grinding attachment holder BSVH 25,5 and attachment arm BSVAK 9/9.
  • Four belt grinding attachment arms BSVAK 9/25-1, BSVAK 9/25, BSVAK 9/16 and BSVAK 4/16.
  • One 1/4“ collet.
  • 1 COMBIDISC® backing pad 1-1/2“ and numerous CD abrasives for universal use on metals, oxidized surfaces and other materials.
  • A wide selection of abrasive belts with aluminum oxide and zirconia as well as 2 grades of non-woven abrasives.

Finishing set POLIFLAP^® with electric straight grinder UGER 10/20 SI 120 V US: Surface finishing kit, ideal for fast and seamless surface texturing on steel and stainless steel. One of a kind electrical straight grinder with speed range from 1,600 to 700 RPM and 9.5 max. amps. The combination of low speed with high power is perfect for achieving fine surface structures using included POLIFLAP^® wheel (with various grit sizes), non-woven POLINOX^® mounted point and Poliflex^® fine grinding point. Also included in the set is a stainless steel sheet and self-adhesive masking tape both for preserving the clear separation between different stroke-finished areas on mitered joints.

• Contents
  • 1 electric straight grinder UGER 10/20 SI 120 V US (1,600-700 RPM, 9.5 max. amps) with various collets (imperial and metric)
  • 1 POLIFLAP^® grinding wheel with 8 different changeable flap grain sizes
  • 1 POLINOX® mounted point
  • 1 Poliflex^® fine grinding point
  • 6-1/2 feet of masking tape and a stainless steel cover sheet.

Ideal for all coarse and fine-grinding, polishing and cleaning tasks, especially on assembly and construction sites. Convenient and easy to use, supplied with a full assortment of tools. Electric angle grinder with electronic RPM control. This “genuine” one-hand angle grinder covers the entire range of operating speeds required for 2” dia. COMBIDISC^® products.

• Contents:
  • 1 electric angle grinder UWER 5/200 SI 120 V US with electronic speed control (20,000-9,000 RPM). Output 0.4 HP, 4.6 max. amps
  • 4 backing pads + 2 arbors for other tool drive systems.
  • Diverse coated abrasive discs, TX discs, Mini-POLIFAN^®, non-woven fleece and felt discs (2” dia.)
  • Polishing paste (in bar form) for use with felt discs.

Electric belt grinder for on-site surface finishing work. Features include stepless electronic RPM control. Provides optimum efficiency through optional use of abrasive belts at high RPM and nonwoven belts at low RPM. For mobile use in trades and industry. Recommendation: Use higher RPM levels (settings 4-6) with coated abrasive belts and lower RPM (settings 1-4) with non-woven cloth backed belts.

• Contents:
  • 1 electric belt sander UBS 5/100 SI 925 120 V US with stepless RPM control. Power consumption: 500 watts.
  • 1 set of assorted belts:
    • Coarse Grinding:
      • 2 belts (1/4” and 1/2” width) in each of the following grit sizes: 40, 60, 80, 120 and 180 (max. peripheral speed: 6,298 SFPM).
    • Fine Grinding:
      • Coarse, medium and fine non-woven fleece belts (max. peripheral speed: 4,920 SFPM).